HP ProDesk 600 G2 Repair & Upgrades — Australia-Wide
Last Updated:
Still running a HP ProDesk 600 G2? The Original PC Doctor keeps older desktops going — we repair the HP ProDesk 600 G2 for power, boot, storage and overheating faults, and can upgrade it with an SSD, more RAM and a clean Windows install to give it years more life. No fix, no fee, Australia-wide.
Fast, honest HP ProDesk 600 G2 repair & upgrades — no fix, no fee.
✔ No fix, no fee · ✔ 90-day warranty · ✔ Onsite, remote & workshop · ✔ Since 2001
Common HP ProDesk 600 G2 Faults We Repair
- Won’t turn on / amber or blinking power light
- Won’t boot, no POST or beep-code errors
- No display / no signal on boot
- Ageing hard drive failure or bad sectors (with data recovery)
- Slow performance — SSD & RAM upgrade to extend its life
- Overheating, dust-clogged or noisy fans
- Failing power supply or swollen capacitors
- Won’t connect to Wi-Fi or the internet
- BIOS / CMOS battery & boot issues
- Windows won’t boot, or upgrade to Windows 10/11
About the HP ProDesk 600 G2
The HP ProDesk 600 G2 is a dependable older desktop that’s still well worth servicing. We repair and upgrade every HP ProDesk 600 G2 — power, motherboard and PSU faults, swollen capacitors, ageing hard drives (with full data recovery), memory and cooling — and a quality SSD, a RAM bump and a clean Windows 10 or 11 install can make it feel new again for a fraction of replacement cost. Genuine, OEM-spec and quality refurbished parts; out-of-warranty and end-of-life fleet units welcome.
Our Repair Process
1. Free phone or Quick Quote triage. 2. Diagnostic — we pinpoint the exact fault. 3. Upfront fixed quote — no fix, no fee. 4. Repair or upgrade with quality parts and a 90-day warranty. Onsite, remote or in our workshop, Australia-wide.
Why The Original PC Doctor
- Since 2001 — 24+ years repairing Australian computers
- No fix, no fee diagnostics — you only pay if we solve it
- 90-day warranty on parts and labour
- Onsite, remote & workshop options to suit you
- Genuine, OEM-spec & quality refurbished parts
- 1,300+ verified customer reviews
Get your HP ProDesk 600 G2 repaired or upgraded — talk to a technician now.
✔ No fix, no fee · ✔ 90-day warranty · ✔ Onsite, remote & workshop · ✔ Since 2001
HP ProDesk 600 G2 Repair FAQs
How much does a HP ProDesk 600 G2 repair or upgrade cost?
Every HP ProDesk 600 G2 job starts with a free, no-obligation Quick Quote and an upfront fixed price. No fix, no fee, with a 90-day warranty. We’ll also tell you honestly if a repair or an SSD/RAM upgrade is the better value.
Can you recover data from an old HP ProDesk 600 G2?
Yes — ageing hard drives are one of the most common reasons we see older desktops, and we can recover documents, photos and files even if the HP ProDesk 600 G2 won’t boot, then move them to a new SSD or PC.
Why won’t my HP ProDesk 600 G2 turn on?
A HP ProDesk 600 G2 that won’t power on is usually a failing power supply, swollen motherboard capacitors, a flat CMOS battery or a power-button fault — all commonly repairable. We diagnose it free and quote upfront.
Is it worth repairing or upgrading an older HP ProDesk 600 G2?
Often, yes — a quality SSD, a RAM bump and a clean Windows 10/11 install can make a HP ProDesk 600 G2 feel new for a fraction of a replacement, and we give honest advice if it isn’t worth it.
Do you repair the HP ProDesk 600 G2 out of warranty?
Absolutely — older and end-of-life HP ProDesk 600 G2 units are our specialty. We’re independent, so we fix machines the manufacturer no longer supports.
Where can you repair my HP ProDesk 600 G2?
Australia-wide — onsite, secure remote support, and workshop repair with nationwide pickup. Call 1300 723 628 or use the Quick Quote.
Related: HP Desktop Repair · Desktop PC Repair · Data Recovery · HP ProDesk 600 G6 Repair · HP ProDesk 600 G4 Repair
Free Resources
Independent, non-commercial references:
HP ProDesk 600 G2 Repair faults we repair every week
PSU failure on the 600W internal supply
Symptom: No power, amber blinking LED or immediate shutdown
How we fix it: Technician swaps the proprietary HP 600W supply, tests rail voltages under load and reuses the original 24-pin and 8-pin cables.
Repair or replace? repair
Swollen electrolytic capacitors on the motherboard
Symptom: Random restarts, POST failure or no display
How we fix it: Board is removed, bad caps identified by visual bulge or ESR meter, replaced with 105 °C low-ESR equivalents and board is cleaned.
Repair or replace? repair
Seagate or WD 3.5 inch HDD failure
Symptom: Clicking, slow boot or SMART errors with data loss risk
How we fix it: Clone existing drive to a new 2.5 inch or M.2 SSD using a hardware imager, install clean Windows 10/11 image and restore user data.
Repair or replace? repair
Overheating from dust-clogged CPU and case fans
Symptom: Thermal throttling, loud fan noise, unexpected shutdowns
How we fix it: Full compressed-air clean of heatsink fins, re-paste CPU with high-grade thermal compound and replace any seized 92 mm or 120 mm fans.
Repair or replace? repair
CMOS battery failure causing BIOS resets
Symptom: Date/time errors, lost boot order and recurring POST messages
How we fix it: Replace the CR2032 cell on the board, reset BIOS to defaults and re-enter any custom settings.
Repair or replace? repair
Failing integrated Intel NIC or Wi-Fi card
Symptom: No network connection or frequent drops
How we fix it: Disable onboard LAN in BIOS, fit a PCIe Gigabit or 802.11ac card in the available slot and install latest drivers.
Repair or replace? repair
HP ProDesk 600 G2 Repair price guide
| Repair | Indicative price | Typical turnaround |
|---|---|---|
| Power supply replacement (600W HP unit) | $180-$260+ | Same or next business day |
| Motherboard capacitor replacement | $220-$340+ | 2-4 business days |
| HDD to SSD migration with data recovery | $160-$280+ | Same or next business day |
| Full clean and thermal repaste | from $149 | Same day |
| CMOS battery and BIOS reset | from $69 | Same day |
| PCIe network or Wi-Fi card install | $95-$145+ | Same day |
| Windows 10/11 clean install and optimisation | $110-$170+ | Same or next business day |
| RAM upgrade to 16 GB DDR4 | $75-$115+ | Same day |
Prices are indicative only — every job is confirmed with a free, no-obligation quote after diagnosis. No Fix, No Fee.
HP ProDesk 600 G2 Repair — your questions answered
How much does it cost to repair a HP ProDesk 600 G2 that won’t turn on?
A no-power fault is usually the internal 600 W PSU or swollen motherboard capacitors. We diagnose first at no charge; replacement parts typically range from $180-$260 for the supply or $220-$340 for capacitor work, completed in one to four days with a 90-day warranty.
Can you upgrade my HP ProDesk 600 G2 with an SSD and more RAM?
Yes. We clone your existing drive to a new SSD, add up to 32 GB DDR4 RAM and install a clean Windows 10 or 11 image. Most owners see the upgrade cost between $160-$280 for the SSD migration plus $75-$115 for RAM, all done on the same day.
Is the HP ProDesk 600 G2 still worth repairing in 2025?
The 600 G2 remains a solid business desktop with a standard ATX layout and upgradable parts. When the PSU, capacitors or storage are restored it easily handles everyday tasks and web browsing, often at a fraction of buying a new machine.
Do you offer onsite repair for the HP ProDesk 600 G2 across Australia?
We provide onsite visits in most capital cities and larger regional centres, plus remote diagnostics and workshop options for all states. A technician can usually attend within one to two business days once the quote is accepted.
What warranty comes with HP ProDesk 600 G2 repairs?
All parts and labour carry a 90-day warranty. If the same fault returns within that period we return to site or workshop at no extra charge.
