HP ProDesk 600 G6 Repair & Upgrade Specialists
Last Updated:
The HP ProDesk 600 G6 is still a workhorse, and we keep them running. From no-power and boot faults to ageing hard drives (with data recovery) and SSD/RAM upgrades, we repair and modernise the HP ProDesk 600 G6 across Australia — honest advice if it’s worth it, every time.
Fast, honest HP ProDesk 600 G6 repair & upgrades — no fix, no fee.
✔ No fix, no fee · ✔ 90-day warranty · ✔ Onsite, remote & workshop · ✔ Since 2001
Common HP ProDesk 600 G6 Faults We Repair
- Won’t turn on / amber or blinking power light
- Won’t boot, no POST or beep-code errors
- No display / no signal on boot
- Ageing hard drive failure or bad sectors (with data recovery)
- Slow performance — SSD & RAM upgrade to extend its life
- Overheating, dust-clogged or noisy fans
- Failing power supply or swollen capacitors
- Won’t connect to Wi-Fi or the internet
- BIOS / CMOS battery & boot issues
- Windows won’t boot, or upgrade to Windows 10/11
About the HP ProDesk 600 G6
The HP ProDesk 600 G6 is a dependable older desktop that’s still well worth servicing. We repair and upgrade every HP ProDesk 600 G6 — power, motherboard and PSU faults, swollen capacitors, ageing hard drives (with full data recovery), memory and cooling — and a quality SSD, a RAM bump and a clean Windows 10 or 11 install can make it feel new again for a fraction of replacement cost. Genuine, OEM-spec and quality refurbished parts; out-of-warranty and end-of-life fleet units welcome.
Our Repair Process
1. Free phone or Quick Quote triage. 2. Diagnostic — we pinpoint the exact fault. 3. Upfront fixed quote — no fix, no fee. 4. Repair or upgrade with quality parts and a 90-day warranty. Onsite, remote or in our workshop, Australia-wide.
Why The Original PC Doctor
- Since 2001 — 24+ years repairing Australian computers
- No fix, no fee diagnostics — you only pay if we solve it
- 90-day warranty on parts and labour
- Onsite, remote & workshop options to suit you
- Genuine, OEM-spec & quality refurbished parts
- 1,300+ verified customer reviews
Get your HP ProDesk 600 G6 repaired or upgraded — talk to a technician now.
✔ No fix, no fee · ✔ 90-day warranty · ✔ Onsite, remote & workshop · ✔ Since 2001
HP ProDesk 600 G6 Repair FAQs
How much does a HP ProDesk 600 G6 repair or upgrade cost?
Every HP ProDesk 600 G6 job starts with a free, no-obligation Quick Quote and an upfront fixed price. No fix, no fee, with a 90-day warranty. We’ll also tell you honestly if a repair or an SSD/RAM upgrade is the better value.
Can you recover data from an old HP ProDesk 600 G6?
Yes — ageing hard drives are one of the most common reasons we see older desktops, and we can recover documents, photos and files even if the HP ProDesk 600 G6 won’t boot, then move them to a new SSD or PC.
Why won’t my HP ProDesk 600 G6 turn on?
A HP ProDesk 600 G6 that won’t power on is usually a failing power supply, swollen motherboard capacitors, a flat CMOS battery or a power-button fault — all commonly repairable. We diagnose it free and quote upfront.
Is it worth repairing or upgrading an older HP ProDesk 600 G6?
Often, yes — a quality SSD, a RAM bump and a clean Windows 10/11 install can make a HP ProDesk 600 G6 feel new for a fraction of a replacement, and we give honest advice if it isn’t worth it.
Do you repair the HP ProDesk 600 G6 out of warranty?
Absolutely — older and end-of-life HP ProDesk 600 G6 units are our specialty. We’re independent, so we fix machines the manufacturer no longer supports.
Where can you repair my HP ProDesk 600 G6?
Australia-wide — onsite, secure remote support, and workshop repair with nationwide pickup. Call 1300 723 628 or use the Quick Quote.
Related: HP Desktop Repair · Desktop PC Repair · Data Recovery · HP ProDesk 600 G4 Repair · HP ProDesk 600 G3 Repair
Free Resources
Independent, non-commercial references:
HP ProDesk 600 G6 Repair faults we repair every week
PSU failure
Symptom: No power, amber or blinking front LED, no fan spin
How we fix it: Remove the 300 W 80+ Bronze internal PSU, test output rails with a multimeter, then fit a compatible HP 613304-001 or equivalent 300 W unit and re-test POST.
Repair or replace? repair
Swollen capacitors on motherboard
Symptom: Random shutdowns, no POST after 2-3 years, bulging caps near VRM
How we fix it: Identify failed Nichicon or Rubycon caps on the Intel Q470 board, desolder and replace with 105 °C low-ESR equivalents of matching values.
Repair or replace? repair
Failing 3.5 inch HDD
Symptom: Clicking noise, SMART errors, slow Windows boot or data loss
How we fix it: Clone the drive to a new 500 GB or 1 TB SATA SSD using sector-by-sector imaging, then replace the mechanical drive and reinstall Windows.
Repair or replace? repair
CMOS battery failure
Symptom: BIOS resets date/time daily, boot loop or lost settings
How we fix it: Open the chassis, replace the CR2032 coin cell on the Q470 board and re-enter BIOS settings or reload defaults.
Repair or replace? repair
Overheating / dust-clogged heatsink
Symptom: Thermal throttling, loud fan, shutdown after 10-15 minutes
How we fix it: Remove side panel, clean the CPU cooler fins and case intake with compressed air and isopropyl, re-paste the Intel CPU with high-grade thermal compound.
Repair or replace? repair
Wi-Fi card dropout
Symptom: Intermittent wireless, yellow triangle in Device Manager
How we fix it: Replace the M.2 2230 Intel AX201 or Realtek RTL8822CE card and update drivers from HP support.
Repair or replace? repair
HP ProDesk 600 G6 Repair price guide
| Repair | Indicative price | Typical turnaround |
|---|---|---|
| PSU replacement | $180-$260+ | Same or next business day |
| Motherboard capacitor repair | $220-$340+ | 2-4 business days |
| HDD to SSD migration + data recovery | $240-$380+ | Same or next business day |
| CMOS battery replacement | from $149 | Same day |
| Full clean and thermal repaste | from $129 | Same day |
| Wi-Fi card replacement | $140-$210+ | Same or next business day |
| RAM upgrade 16 GB DDR4-2666 | $95-$145+ | Same day |
| Windows 11 clean install + drivers | from $149 | Same or next business day |
Prices are indicative only — every job is confirmed with a free, no-obligation quote after diagnosis. No Fix, No Fee.
HP ProDesk 600 G6 Repair — your questions answered
How much does it cost to repair an HP ProDesk 600 G6 that won't turn on?
A no-power fault is usually the internal 300 W PSU. We bench-test the unit first; if the PSU has failed we fit a replacement for $180-$260 and issue a 90-day warranty. If the motherboard is also damaged we provide a clear quote before any work begins.
Is it worth upgrading an HP ProDesk 600 G6 to Windows 11?
The 10th-gen Intel CPUs in the 600 G6 meet the Windows 11 requirements. A clean install plus an SSD and 16 GB RAM upgrade typically costs $240-$380 and gives the machine another three to five years of reliable service, far cheaper than a new desktop.
Can you recover data from a clicking hard drive in my ProDesk 600 G6?
We image the drive in our clean-room workstation before any repairs. Most mechanical failures are recoverable if we act before further bad sectors appear; pricing starts at $240 and includes cloning to a new SSD.
How long does a typical HP ProDesk 600 G6 repair take?
Simple jobs such as PSU or CMOS battery replacement are usually completed the same day. More involved work such as capacitor repair or full data migration takes two to four business days once parts arrive.
Do you offer onsite service for the HP ProDesk 600 G6 in regional Australia?
Yes. Our technicians travel to homes and offices within 100 km of major capital cities and we also support remote diagnostics for regional customers. Onsite call-out fees start from $129 depending on distance.
